Trace collected at: 2010-12-21 13:18:11.510000
----------------------------------------------------------------------
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[38]:     if(connector):
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[39]:         print >> log, "User specified connector J%d.  This will test channels %s" % (connector, str(channel_map[connector]))
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[46]:     if(debug):
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[50]:     results = {}
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[51]:     readback = {}
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[54]:     msg = "Set FBOXes to GROUNDED"
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[55]:     print >> log, msg
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[56]:     Gseos.MessageBox(msg)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[59]:     cmd.efw_disarm(4)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[62]:     matrix_config(1)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]:     matrix.reset(factory=True)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]:     print >> log, "Invoking switch matrix configuration %d" % (config_num)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]:     config_map = {0: [],
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[534]:     try:
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[535]:         switches = config_map[config_num]
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[539]:         for switch in switches:
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[540]:             print >> log, "Closing matrix switch %d" % (switch)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[541]:             matrix.close(switch)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[539]:         for switch in switches:
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[540]:             print >> log, "Closing matrix switch %d" % (switch)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[541]:             matrix.close(switch)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[539]:         for switch in switches:
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[65]:     for channel in channel_map[connector]:
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[66]:         sig_name = 'vsphere%d' % channel
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[67]:         results[sig_name] = {}
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[68]:         readback[sig_name] = {}
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[69]:         for value in dac_settings:
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[70]:             print >> log, "Setting BIAS%d to 0x%02x" % (channel, value)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[72]:             util.SET_BIAS(channel, value)
../../GSEOS_scripts\util.py[26]:     cmd.EFW_BIAS( ch, val>>8 )
../../GSEOS_scripts\util.py[27]:     cmd.EFW_BIASL( val & 0xff )
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[73]:             cmd.EFW_LDAC(readback=1)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[77]:             try:
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[78]:                 wait(APID_265, lambda: True, flTimeout=20)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[78]:                 wait(APID_265, lambda: True, flTimeout=20)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[88]:                 rb = EU('APID_265.IEFI_IBIAS%d' % (channel))
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[89]:                 print >> log, 'APID_265.IEFI_IBIAS%d readback = %.04f' % (channel, rb)
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[90]:                 readback[sig_name][value] = rb
../../GSEOS_scripts/BEB/science_calibration\beb_scical_bias.py[93]:             result = measure(sig_name + '_333', 'electrometer')
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[294]:     dmm_channel_map = {'vsphere1': 101,
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[341]:     com1_open = [212, 213, 214, 221, 231, 241] # channels to open when reading com1
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[342]:     com2_open = [211, 213, 214, 222, 232, 242] # same for com2
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[343]:     amm_channel_map = {
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[429]:     sig_name = sig_name.lower()
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[430]:     if(with_what == 'dmm'):
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[452]:     elif(with_what == 'electrometer'):
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[454]:         try:
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[455]:             channel = amm_channel_map[sig_name]
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[459]:         matrix.abort() # If any previous dmm measurements were made, this erases the scan list so that channels can be closed w/o causing an error
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[460]:         matrix.reset(100) # Open all channels on slot 100
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[461]:         open_channels = channel[0]
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[462]:         close_channels = channel[1]
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[463]:         print >> log, "Opening matrix channels %s" % (str(open_channels))
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[464]:         print >> log, "Closing matrix channels %s" % (str(close_channels))
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[465]:         matrix.open(open_channels)   # Open channels on other slots
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[466]:         matrix.close(close_channels) # Close channels needed to make this measurement
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[468]:         time.sleep(.5)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[469]:         electrometer.range('AUTO')
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[470]:         electrometer.digits(7)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[471]:         electrometer.zcheck(off)
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[472]:         time.sleep(3) # Short delay so signal can settle after connections made
../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[473]:         retval = electrometer.measure()