Trace collected at: 2010-11-21 18:13:17.125000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[344]: scope.gpib_cmd('ch2:scale %s' % scale) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:14:15.453000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[344]: scope.gpib_cmd('ch2:scale %s' % scale) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:14:51.750000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:15:33.187000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:16:09.515000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:17:06.140000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:21:04.703000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[344]: scope.gpib_cmd('ch2:scale %s' % scale) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:21:56.203000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[344]: scope.gpib_cmd('ch2:scale %s' % scale) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:22:26.484000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:23:00.390000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:23:50.281000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:24:28.343000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:24:57.593000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[378]: print >> log, "ERROR: Scope couldn't detect phase or some other measurement was configured on MEAS1" Trace collected at: 2010-11-21 18:25:32.843000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:26:42.281000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[344]: scope.gpib_cmd('ch2:scale %s' % scale) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:27:22.218000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[344]: scope.gpib_cmd('ch2:scale %s' % scale) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:27:59.906000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:28:37.578000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:29:04.734000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg) Trace collected at: 2010-11-21 18:29:48.171000 ---------------------------------------------------------------------- ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[321]: chan_name = full_chan_name[:-1] # bias3 -> bias ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[322]: chan_num = int(full_chan_name[-1:]) # bias3 -> 3 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[325]: ds.set_ampl(2.5, vpp=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[328]: scope_config_num = 8 ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[329]: print >> log, "Recalling scope saved config %d" % (scope_config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[330]: scope.gpib_cmd('recall:setup %d' % (scope_config_num)) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[332]: matrix_config(matrix_map[full_chan_name]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[486]: matrix.reset(factory=True) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[488]: print >> log, "Invoking switch matrix configuration %d" % (config_num) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[492]: config_map = {0: [], ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[525]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[526]: switches = config_map[config_num] ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[531]: print >> log, "Closing matrix switch %d" % (switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[532]: matrix.close(switch) ../../GSEOS_scripts/BEB/science_calibration\beb_scical.py[530]: for switch in switches: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[333]: time.sleep(3) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[335]: ds.set_freq(freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[336]: secdiv = 1.0/freq ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[338]: print >> log, "Measuring %s @ %d Hz" % (full_chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[342]: try: ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[343]: scale = scope_scales[fbox][chan_name][freq] ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[345]: except (NameError, KeyError): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[346]: print >> log, "Warning: couldn't find scope_scales[%s][%d]" % (chan_name, freq) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[355]: scope.gpib_cmd('horizontal:main:scale %s' % (str(secdiv))) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[356]: time.sleep(3+10*secdiv) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[359]: ampl = float(scope.gpib_cmd('measurement:MEAS2:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[360]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[361]: print >> log, "Amplitude (SENSOR%d): %.4f V" % (chan_num, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[366]: ampl = float(scope.gpib_cmd('measurement:MEAS3:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[367]: if(ampl < 1000): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[368]: print >> log, "Amplitude (%s): %.4f V" % (full_chan_name, ampl) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[374]: phase_shift_in_deg = float(scope.gpib_cmd('measurement:MEAS1:data?').strip().split(',')[0]) ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[375]: if(phase_shift_in_deg <= 360): ../../GSEOS_scripts/BEB/science_calibration\beb_scical_ac_test.py[376]: print >> log, "Phase shift: %.3f deg" % (phase_shift_in_deg)