Wed Oct 13 11:43:49 2010 efw: Set new output location to 20101013_114349_UUT2_BKG_Module_
Wed Oct 13 11:43:49 2010 TEST_BKG: ----------------------------------------
Wed Oct 13 11:43:49 2010 TEST_BKG: Starting script TEST_BKG_1.py
Wed Oct 13 11:43:49 2010 TEST_BKG: ========================================
Wed Oct 13 11:43:49 2010 TEST_BKG: BKG_1 - VERIFY BASIC TIMING            
Wed Oct 13 11:43:49 2010 TEST_BKG: ========================================
Wed Oct 13 11:43:49 2010 TEST_BKG: 1. Increasing TM Rate, Clear Start 
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 11:43:49 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:43:58 2010 TEST_BKG: 2.  Verifying BKG ISR Duration     
Wed Oct 13 11:43:58 2010 efw_cmd_log: EFW_ADRH(1)
Wed Oct 13 11:43:58 2010 efw_cmd_log: EFW_ADRL(18)
Wed Oct 13 11:43:58 2010 efw_cmd_log: EFW_LOAD(239)
Wed Oct 13 11:44:06 2010 TEST_BKG: Maximum Interrupt Service Time is 0.000 msec
Wed Oct 13 11:44:06 2010 TEST_BKG: Percent of Interrupt at 256 Hz is 0.000 percent
Wed Oct 13 11:44:06 2010 TEST_BKG: Maximum Interrupt Service Routine= 0 hex
Wed Oct 13 11:44:06 2010 TEST_BKG: Requirement for ISR Duration < 2 msec : PASS
Wed Oct 13 11:44:06 2010 TEST_BKG: 3.0 Removing Vectors     
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_ADRH(1)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_ADRL(18)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:44:06 2010 TEST_BKG: ================END=====================
Wed Oct 13 11:44:06 2010 TEST_BKG: Script TEST_BKG_1.py completed
Wed Oct 13 11:44:06 2010 TEST_BKG: ----------------------------------------
Wed Oct 13 11:44:06 2010 TEST_BKG: Starting script TEST_BKG_2.py
Wed Oct 13 11:44:06 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:06 2010 TEST_BKG: BKG_2 - VERIFY WATCHDOG FREQUENCY at 1Hz
Wed Oct 13 11:44:06 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:06 2010 TEST_BKG: 1. Increasing TM Rate, Clearing TestValue
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 11:44:06 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:44:06 2010 TEST_BKG: 2. Installing Rate Monitor for Watchdog  
Wed Oct 13 11:44:07 2010 efw_cmd_log: EFW_ADRH(0)
Wed Oct 13 11:44:07 2010 efw_cmd_log: EFW_ADRL(240)
Wed Oct 13 11:44:07 2010 efw_cmd_log: EFW_LOAD(247)
Wed Oct 13 11:44:12 2010 TEST_BKG: 3. Measuring Rate of Counting            
Wed Oct 13 11:44:22 2010 TEST_BKG: Exception in script TEST_BKG_2.py: Sequencer '_' Wait() has timed out
Wed Oct 13 11:44:22 2010 TEST_BKG: Traceback (most recent call last):
Wed Oct 13 11:44:22 2010 TEST_BKG:   File "C:\Documents and Settings\rbsp\My Documents\RBSP-GSE\software\GSEOS\Instruments\EFW\efw_scripting.py", line 358, in run_fn
Wed Oct 13 11:44:22 2010 TEST_BKG:     retval = script_module.main(*args, **kwargs)
Wed Oct 13 11:44:22 2010 TEST_BKG:   File "../../GSEOS_scripts/FSW_scripts\TEST_BKG_2.py", line 27, in main
Wed Oct 13 11:44:22 2010 TEST_BKG:     wait(APID_267, lambda: APID_267.TESTVALUE != 0 , flTimeout=10)
Wed Oct 13 11:44:22 2010 TEST_BKG:   File "d:\Gseos6.0\Build\Gseos/PyModules\GSequencer\GseosSequencer.py", line 450, in Wait
Wed Oct 13 11:44:22 2010 TEST_BKG: TSeqTimeoutError: Sequencer '_' Wait() has timed out
Wed Oct 13 11:44:22 2010 TEST_BKG: ----------------------------------------
Wed Oct 13 11:44:22 2010 TEST_BKG: Starting script TEST_BKG_3.py
Wed Oct 13 11:44:22 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:22 2010 TEST_BKG: BKG_3 - VERIFY MET OFFSET MEASUREMENT   
Wed Oct 13 11:44:22 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:22 2010 TEST_BKG: 1. Initializing    
Wed Oct 13 11:44:22 2010 TEST_BKG: 1.1 Disabling SRAM Protection/Checksums 
Wed Oct 13 11:44:22 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 11:44:22 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 11:44:23 2010 TEST_BKG: 1.2 Loading TEST1PPS program 
Wed Oct 13 11:44:23 2010 efw: idpu_load(addr=0x00007000, bytes=0x(AA, 3E, 00, 21, 09, 70, C3, 03, 00, DB, 1B, E6, 01, 21, 1D, 70, BE, C8, 77, B7, C8, DB, 23, D3, 18, 32, F8, DD, C9, 00))
Wed Oct 13 11:44:23 2010 TEST_BKG: 1.3 Starting program 
Wed Oct 13 11:44:23 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 11:44:23 2010 efw_cmd_log: EFW_EXEC(112)
Wed Oct 13 11:44:32 2010 TEST_BKG: 2.0 Comparing SC-IDPU 1PPS Time Measures
Wed Oct 13 11:44:33 2010 TEST_BKG:     FPGA Measurement = 0.129 seconds
Wed Oct 13 11:44:33 2010 TEST_BKG:      S/W Measurement = 0.127 seconds
Wed Oct 13 11:44:33 2010 TEST_BKG:     Difference of 0.002 : PASS
Wed Oct 13 11:44:33 2010 TEST_BKG: 3.0 Cleaning up, Stopping Program
Wed Oct 13 11:44:33 2010 efw_cmd_log: EFW_STOPUSER(0)
Wed Oct 13 11:44:39 2010 TEST_BKG: 3.1 ReArming SRAM Protections
Wed Oct 13 11:44:39 2010 efw_cmd_log: EFW_ARM(3)
Wed Oct 13 11:44:39 2010 efw_cmd_log: EFW_SRMWRTCTL(1)
Wed Oct 13 11:44:39 2010 TEST_BKG: ================END=====================
Wed Oct 13 11:44:39 2010 TEST_BKG: Script TEST_BKG_3.py completed
Wed Oct 13 11:44:39 2010 TEST_BKG: ----------------------------------------
Wed Oct 13 11:44:39 2010 TEST_BKG: Starting script TEST_BKG_4.py
Wed Oct 13 11:44:39 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:39 2010 TEST_BKG: BKG_4 - VERIFY BKG0 AND BKG1 VECTORS    
Wed Oct 13 11:44:39 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:39 2010 TEST_BKG: 1.0 Start with TESTVALUE = 0, No Errors
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_CLEAR()
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:44:40 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 11:44:40 2010 TEST_BKG: 1.1 Load Both BKG0 and BKG1 test routines
Wed Oct 13 11:44:40 2010 efw: idpu_load(addr=0x00007000, bytes=0x(AA, 21, 08, 70, 22, 2D, 90, C9, 21, F9, DD, 34, C9))
Wed Oct 13 11:44:41 2010 efw: idpu_load(addr=0x00007400, bytes=0x(AA, 21, 08, 74, 22, 2F, 90, C9, 21, FA, DD, 34, C9))
Wed Oct 13 11:44:42 2010 TEST_BKG: 2.0 Start both routines
Wed Oct 13 11:44:42 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 11:44:42 2010 efw_cmd_log: EFW_EXEC(112)
Wed Oct 13 11:44:42 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 11:44:42 2010 efw_cmd_log: EFW_EXEC(116)
Wed Oct 13 11:44:47 2010 efw_log: 0x4cb5fe08 2010-10-13 11:44:24 0xd4 0x007401 LDNOAAERR In EXEC command, no Validity Code (0xAA) found at start
Wed Oct 13 11:44:51 2010 TEST_BKG: 3.0 Measuring Frequencies
Wed Oct 13 11:44:52 2010 TEST_BKG:    BKG0 Rate is 0 Hz 
Wed Oct 13 11:44:52 2010 TEST_BKG:    : FAIL
Wed Oct 13 11:44:54 2010 TEST_BKG:    BKG1 Rate is 0 Hz 
Wed Oct 13 11:44:54 2010 TEST_BKG:    : FAIL
Wed Oct 13 11:44:54 2010 TEST_BKG: 4.0 Removing Vector Calls
Wed Oct 13 11:44:54 2010 efw: idpu_load(addr=0x0000902D, bytes=0x(00, 00, 00, 00))
Wed Oct 13 11:44:54 2010 TEST_BKG: ================END=====================
Wed Oct 13 11:44:54 2010 TEST_BKG: Script TEST_BKG_4.py completed
Wed Oct 13 11:44:54 2010 TEST_BKG: ----------------------------------------
Wed Oct 13 11:44:54 2010 TEST_BKG: Starting script TEST_BKG_5.py
Wed Oct 13 11:44:54 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:54 2010 TEST_BKG: BKG_5 - VERIFY FREQ of CALLS            
Wed Oct 13 11:44:54 2010 TEST_BKG: ========================================
Wed Oct 13 11:44:54 2010 TEST_BKG: 1. Increasing TM Rate 
Wed Oct 13 11:44:54 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 11:44:54 2010 TEST_BKG: 2.1 Verifying DFB128 at 128 Hz          
Wed Oct 13 11:44:54 2010 efw_cmd_log: EFW_ADRH(0)
Wed Oct 13 11:44:54 2010 efw_cmd_log: EFW_ADRL(134)
Wed Oct 13 11:44:54 2010 efw_cmd_log: EFW_LOAD(247)
Wed Oct 13 11:45:13 2010 TEST_BKG: Exception in script TEST_BKG_5.py: Sequencer '_' Wait() has timed out
Wed Oct 13 11:45:13 2010 TEST_BKG: Traceback (most recent call last):
Wed Oct 13 11:45:13 2010 TEST_BKG:   File "C:\Documents and Settings\rbsp\My Documents\RBSP-GSE\software\GSEOS\Instruments\EFW\efw_scripting.py", line 358, in run_fn
Wed Oct 13 11:45:13 2010 TEST_BKG:     retval = script_module.main(*args, **kwargs)
Wed Oct 13 11:45:13 2010 TEST_BKG:   File "../../GSEOS_scripts/FSW_scripts\TEST_BKG_5.py", line 49, in main
Wed Oct 13 11:45:13 2010 TEST_BKG:     dfb128 = getrate( 0 )                    #Get Rate for DFB16/HSK
Wed Oct 13 11:45:13 2010 TEST_BKG:   File "../../GSEOS_scripts/FSW_scripts\TEST_BKG_5.py", line 31, in getrate
Wed Oct 13 11:45:13 2010 TEST_BKG:     wait(APID_267, lambda: APID_267.TESTVALUE != 0 , flTimeout=10)
Wed Oct 13 11:45:13 2010 TEST_BKG: TSeqTimeoutError: Sequencer '_' Wait() has timed out
Wed Oct 13 11:45:13 2010 TEST_BKG: **** BKG Module FAIL 2 Errors ****
Wed Oct 13 11:45:13 2010 TEST_BKG: Script TEST_BKG.py completed
Wed Oct 13 11:45:13 2010 efw_scripting: Recorded profile information for script TEST_BKG to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_profile.txt
Wed Oct 13 11:45:13 2010 efw_scripting: Recorded trace for script TEST_BKG to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_trace.txt
Wed Oct 13 11:53:07 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 11:55:31 2010 TEST_BKG_1: ----------------------------------------
Wed Oct 13 11:55:31 2010 TEST_BKG_1: Starting script TEST_BKG_1.py
Wed Oct 13 11:55:31 2010 TEST_BKG_1: ========================================
Wed Oct 13 11:55:31 2010 TEST_BKG_1: BKG_1 - VERIFY BASIC TIMING            
Wed Oct 13 11:55:31 2010 TEST_BKG_1: ========================================
Wed Oct 13 11:55:31 2010 TEST_BKG_1: 1. Increasing TM Rate, Clear Start 
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:55:31 2010 TEST_BKG_1: 2.  Verifying BKG ISR Duration @BKG[111]
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_ADRH(1)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_ADRL(17)
Wed Oct 13 11:55:31 2010 efw_cmd_log: EFW_LOAD(239)
Wed Oct 13 11:55:39 2010 TEST_BKG_1: Maximum Interrupt Service Time is 0.839 msec
Wed Oct 13 11:55:39 2010 TEST_BKG_1: Percent of Interrupt at 256 Hz is 21.484 percent
Wed Oct 13 11:55:39 2010 TEST_BKG_1: Maximum Interrupt Service Routine= 2 hex
Wed Oct 13 11:55:39 2010 TEST_BKG_1: Requirement for ISR Duration < 2 msec : PASS
Wed Oct 13 11:55:39 2010 TEST_BKG_1: 3.0 Restoring No Op at BKG[111]     
Wed Oct 13 11:55:40 2010 efw_cmd_log: EFW_ADRH(1)
Wed Oct 13 11:55:40 2010 efw_cmd_log: EFW_ADRL(17)
Wed Oct 13 11:55:40 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 11:55:40 2010 efw_cmd_log: EFW_SRMWRTCTL(1)
Wed Oct 13 11:55:40 2010 TEST_BKG_1: ================END=====================
Wed Oct 13 11:55:40 2010 TEST_BKG_1: Script TEST_BKG_1.py completed
Wed Oct 13 11:55:40 2010 efw_scripting: Recorded profile information for script TEST_BKG_1 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_1_profile.txt
Wed Oct 13 11:55:40 2010 efw_scripting: Recorded trace for script TEST_BKG_1 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_1_trace.txt
Wed Oct 13 12:27:11 2010 TEST_BKG_2: ----------------------------------------
Wed Oct 13 12:27:11 2010 TEST_BKG_2: Starting script TEST_BKG_2.py
Wed Oct 13 12:27:11 2010 TEST_BKG_2: ========================================
Wed Oct 13 12:27:11 2010 TEST_BKG_2: BKG_2 - VERIFY WATCHDOG FREQUENCY at 1Hz
Wed Oct 13 12:27:11 2010 TEST_BKG_2: ========================================
Wed Oct 13 12:27:11 2010 TEST_BKG_2: 1. Increasing TM Rate, Clearing TestValue
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:27:11 2010 TEST_BKG_2: 2. Installing Counter for Watchdog @BKG[F3]
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_ADRH(0)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_ADRL(243)
Wed Oct 13 12:27:11 2010 efw_cmd_log: EFW_LOAD(247)
Wed Oct 13 12:27:19 2010 TEST_BKG_2: 3. Measuring Rate of Counting            
Wed Oct 13 12:27:21 2010 TEST_BKG_2: Exception in script TEST_BKG_2.py: __call__() got an unexpected keyword argument 'end'
Wed Oct 13 12:27:21 2010 TEST_BKG_2: Traceback (most recent call last):
Wed Oct 13 12:27:21 2010 TEST_BKG_2:   File "C:\Documents and Settings\rbsp\My Documents\RBSP-GSE\software\GSEOS\Instruments\EFW\efw_scripting.py", line 358, in run_fn
Wed Oct 13 12:27:21 2010 TEST_BKG_2:     retval = script_module.main(*args, **kwargs)
Wed Oct 13 12:27:21 2010 TEST_BKG_2:   File "../../GSEOS_scripts/FSW_scripts\TEST_BKG_2.py", line 36, in main
Wed Oct 13 12:27:21 2010 TEST_BKG_2:     log('Watchdog Rate = %d Hz' %delta, end=':');pf(delta==1)
Wed Oct 13 12:27:21 2010 TEST_BKG_2: TypeError: __call__() got an unexpected keyword argument 'end'
Wed Oct 13 12:27:22 2010 efw_scripting: Recorded profile information for script TEST_BKG_2 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_2_profile.txt
Wed Oct 13 12:27:22 2010 efw_scripting: Recorded trace for script TEST_BKG_2 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_2_trace.txt
Wed Oct 13 12:31:48 2010 TEST_BKG_2: ----------------------------------------
Wed Oct 13 12:31:48 2010 TEST_BKG_2: Starting script TEST_BKG_2.py
Wed Oct 13 12:31:48 2010 TEST_BKG_2: ========================================
Wed Oct 13 12:31:48 2010 TEST_BKG_2: BKG_2 - VERIFY WATCHDOG FREQUENCY at 1Hz
Wed Oct 13 12:31:48 2010 TEST_BKG_2: ========================================
Wed Oct 13 12:31:48 2010 TEST_BKG_2: 1. Increasing TM Rate, Clearing TestValue
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:31:48 2010 TEST_BKG_2: 2. Installing Counter for Watchdog @BKG[F3]
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_ADRH(0)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_ADRL(243)
Wed Oct 13 12:31:48 2010 efw_cmd_log: EFW_LOAD(247)
Wed Oct 13 12:31:56 2010 TEST_BKG_2: 3. Measuring Rate of Counting            
Wed Oct 13 12:31:58 2010 TEST_BKG_2: Watchdog Rate = 1 Hz : PASS
Wed Oct 13 12:31:58 2010 TEST_BKG_2: 4. Restoring NOP at BKG[F3]  
Wed Oct 13 12:31:58 2010 efw_cmd_log: EFW_ADRH(0)
Wed Oct 13 12:31:58 2010 efw_cmd_log: EFW_ADRL(243)
Wed Oct 13 12:31:58 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:31:58 2010 efw_cmd_log: EFW_SRMWRTCTL(1)
Wed Oct 13 12:31:58 2010 TEST_BKG_2: ================END=====================
Wed Oct 13 12:31:58 2010 TEST_BKG_2: Script TEST_BKG_2.py completed
Wed Oct 13 12:31:58 2010 efw_scripting: Recorded profile information for script TEST_BKG_2 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_2_profile.txt
Wed Oct 13 12:31:58 2010 efw_scripting: Recorded trace for script TEST_BKG_2 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_2_trace.txt
Wed Oct 13 12:32:20 2010 TEST_BKG_3: ----------------------------------------
Wed Oct 13 12:32:20 2010 TEST_BKG_3: Starting script TEST_BKG_3.py
Wed Oct 13 12:32:20 2010 TEST_BKG_3: ========================================
Wed Oct 13 12:32:20 2010 TEST_BKG_3: BKG_3 - VERIFY MET OFFSET MEASUREMENT   
Wed Oct 13 12:32:20 2010 TEST_BKG_3: ========================================
Wed Oct 13 12:32:20 2010 TEST_BKG_3: 1. Initializing    
Wed Oct 13 12:32:20 2010 TEST_BKG_3: 1.0 Start with TESTVALUE = 0, No Errors
Wed Oct 13 12:32:20 2010 efw_cmd_log: EFW_CLEAR()
Wed Oct 13 12:32:20 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:32:20 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 12:32:21 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:32:21 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:32:21 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 12:32:21 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:32:21 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 12:32:25 2010 TEST_BKG_3: 1.1 Disabling SRAM Protection/Checksums 
Wed Oct 13 12:32:25 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 12:32:25 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 12:32:26 2010 TEST_BKG_3: 1.2 Loading TEST1PPS program 
Wed Oct 13 12:32:26 2010 efw: idpu_load(addr=0x00007000, bytes=0x(AA, 3E, 00, 21, 09, 70, C3, 03, 00, DB, 1B, E6, 01, 21, 1D, 70, BE, C8, 77, B7, C8, DB, 23, D3, 18, 32, F8, DD, C9, 00))
Wed Oct 13 12:32:26 2010 TEST_BKG_3: 1.3 Starting program 
Wed Oct 13 12:32:26 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 12:32:26 2010 efw_cmd_log: EFW_EXEC(112)
Wed Oct 13 12:32:32 2010 TEST_BKG_3: 2.0 Comparing SC-IDPU 1PPS Time Measures
Wed Oct 13 12:32:33 2010 TEST_BKG_3:     FPGA Measurement = 0.890 seconds
Wed Oct 13 12:32:33 2010 TEST_BKG_3:      S/W Measurement = 0.889 seconds
Wed Oct 13 12:32:33 2010 TEST_BKG_3:     Difference of 0.002 : PASS
Wed Oct 13 12:32:33 2010 TEST_BKG_3: 3.0 Cleaning up, Stopping Program
Wed Oct 13 12:32:33 2010 efw_cmd_log: EFW_STOPUSER(0)
Wed Oct 13 12:32:39 2010 TEST_BKG_3: 3.1 ReArming SRAM Protections
Wed Oct 13 12:32:39 2010 efw_cmd_log: EFW_ARM(3)
Wed Oct 13 12:32:39 2010 efw_cmd_log: EFW_SRMWRTCTL(1)
Wed Oct 13 12:32:39 2010 TEST_BKG_3: ================END=====================
Wed Oct 13 12:32:39 2010 TEST_BKG_3: Script TEST_BKG_3.py completed
Wed Oct 13 12:32:39 2010 efw_scripting: Recorded profile information for script TEST_BKG_3 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_3_profile.txt
Wed Oct 13 12:32:39 2010 efw_scripting: Recorded trace for script TEST_BKG_3 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_3_trace.txt
Wed Oct 13 12:32:46 2010 TEST_BKG_4: ----------------------------------------
Wed Oct 13 12:32:46 2010 TEST_BKG_4: Starting script TEST_BKG_4.py
Wed Oct 13 12:32:46 2010 TEST_BKG_4: ========================================
Wed Oct 13 12:32:46 2010 TEST_BKG_4: BKG_4 - VERIFY BKG0 AND BKG1 VECTORS    
Wed Oct 13 12:32:46 2010 TEST_BKG_4: ========================================
Wed Oct 13 12:32:46 2010 TEST_BKG_4: 1.0 Start with TESTVALUE = 0, No Errors
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_CLEAR()
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 12:32:46 2010 TEST_BKG_4: 1.1 Disabling SRAM Protection/Checksums 
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 12:32:46 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 12:32:47 2010 TEST_BKG_4: 1.2 Load Both BKG0 and BKG1 test routines
Wed Oct 13 12:32:47 2010 efw: idpu_load(addr=0x00007000, bytes=0x(AA, 21, 08, 70, 22, 2D, 90, C9, 21, F9, DD, 34, C9))
Wed Oct 13 12:32:48 2010 efw: idpu_load(addr=0x00007400, bytes=0x(AA, 21, 08, 74, 22, 2F, 90, C9, 21, FA, DD, 34, C9))
Wed Oct 13 12:32:49 2010 TEST_BKG_4: 2.0 Start both routines
Wed Oct 13 12:32:49 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 12:32:49 2010 efw_cmd_log: EFW_EXEC(112)
Wed Oct 13 12:32:49 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 12:32:49 2010 efw_cmd_log: EFW_EXEC(116)
Wed Oct 13 12:32:57 2010 TEST_BKG_4: 3.0 Measuring Frequencies
Wed Oct 13 12:32:59 2010 TEST_BKG_4:    BKG0 Rate is 0 Hz 
Wed Oct 13 12:32:59 2010 TEST_BKG_4:    : FAIL
Wed Oct 13 12:33:01 2010 TEST_BKG_4:    BKG1 Rate is 0 Hz 
Wed Oct 13 12:33:01 2010 TEST_BKG_4:    : FAIL
Wed Oct 13 12:33:01 2010 TEST_BKG_4: 4.0 Removing Vector Calls
Wed Oct 13 12:33:01 2010 efw: idpu_load(addr=0x0000902D, bytes=0x(00, 00, 00, 00))
Wed Oct 13 12:33:01 2010 TEST_BKG_4: ================END=====================
Wed Oct 13 12:33:01 2010 TEST_BKG_4: Script TEST_BKG_4.py completed
Wed Oct 13 12:33:01 2010 efw_scripting: Recorded profile information for script TEST_BKG_4 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_4_profile.txt
Wed Oct 13 12:33:01 2010 efw_scripting: Recorded trace for script TEST_BKG_4 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_4_trace.txt
Wed Oct 13 12:49:09 2010 TEST_BKG_4: ----------------------------------------
Wed Oct 13 12:49:09 2010 TEST_BKG_4: Starting script TEST_BKG_4.py
Wed Oct 13 12:49:09 2010 TEST_BKG_4: ========================================
Wed Oct 13 12:49:09 2010 TEST_BKG_4: BKG_4 - VERIFY BKG0 AND BKG1 VECTORS    
Wed Oct 13 12:49:09 2010 TEST_BKG_4: ========================================
Wed Oct 13 12:49:09 2010 TEST_BKG_4: 1.0 Start with TESTVALUE = 0, No Errors
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_CLEAR()
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_ADRL(249)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_ADRH(221)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_ADRL(250)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_LOAD(0)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_TMPKTRATE(4, 1)
Wed Oct 13 12:49:09 2010 TEST_BKG_4: 1.1 Disabling SRAM Protection/Checksums 
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_DISARM(3)
Wed Oct 13 12:49:09 2010 efw_cmd_log: EFW_SRMWRTCTL(0)
Wed Oct 13 12:49:10 2010 TEST_BKG_4: 1.2 Load Both BKG0 and BKG1 test routines
Wed Oct 13 12:49:10 2010 efw: idpu_load(addr=0x00007000, bytes=0x(AA, 21, 08, 70, 22, 2D, 91, C9, 21, F9, DD, 34, C9))
Wed Oct 13 12:49:12 2010 efw: idpu_load(addr=0x00007400, bytes=0x(AA, 21, 08, 74, 22, 2F, 91, C9, 21, FA, DD, 34, C9))
Wed Oct 13 12:49:13 2010 TEST_BKG_4: 2.0 Start both routines
Wed Oct 13 12:49:13 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 12:49:13 2010 efw_cmd_log: EFW_EXEC(112)
Wed Oct 13 12:49:13 2010 efw_cmd_log: EFW_CMDS(1)
Wed Oct 13 12:49:13 2010 efw_cmd_log: EFW_EXEC(116)
Wed Oct 13 12:49:21 2010 TEST_BKG_4: 3.0 Measuring Frequencies
Wed Oct 13 12:49:23 2010 TEST_BKG_4:    BKG0 Rate is 8 Hz 
Wed Oct 13 12:49:23 2010 TEST_BKG_4:    : PASS
Wed Oct 13 12:49:25 2010 TEST_BKG_4:    BKG1 Rate is 32 Hz 
Wed Oct 13 12:49:25 2010 TEST_BKG_4:    : PASS
Wed Oct 13 12:49:25 2010 TEST_BKG_4: 4.0 Removing Vectors @912D & 912F
Wed Oct 13 12:49:25 2010 efw: idpu_load(addr=0x0000912D, bytes=0x(00, 00, 00, 00))
Wed Oct 13 12:49:25 2010 TEST_BKG_4: ================END=====================
Wed Oct 13 12:49:25 2010 TEST_BKG_4: Script TEST_BKG_4.py completed
Wed Oct 13 12:49:25 2010 efw_scripting: Recorded profile information for script TEST_BKG_4 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_4_profile.txt
Wed Oct 13 12:49:25 2010 efw_scripting: Recorded trace for script TEST_BKG_4 to file Instruments/EFW/bench-tests\20101013_114349_UUT2_BKG_Module_\TEST_BKG_4_trace.txt